Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8240s with 7060?

kire, modified 6 Years ago.

8240s with 7060?

Youngling Posts: 16 Join Date: 5/10/09 Recent Posts
Is it at all possible to use 8240s with 7060?
Is it possible to have the 8240s calibrated as well (and the 7060 "as is")?

Thanks for your help
1038, modified 6 Years ago.

Re: 8240s with 7060?

Jedi Master Posts: 340 Join Date: 4/6/09 Recent Posts
It certainly is possible, it's just a matter of planning your Bass Management correctly and using the 8240's analog inputs. The 7060 has low passed outputs, so you'll want to make sure that you are not filtering the low end of the 8240's if you intend to run your signal into the 7060 then out into the 8240's.