Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

one more question about 8250 and 8050

maryjblige, modified 6 Years ago.

one more question about 8250 and 8050

Youngling Posts: 5 Join Date: 9/17/13 Recent Posts
Dear Ilkka

I wanna know, if i don't use GLM on 8250, and using analogue input, is 8250 sounds exactly the same with 8050?


Thanx a lot
ilkka-rissanen, modified 6 Years ago.

Re: one more question about 8250 and 8050

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

They share the same enclosure, drivers and amplifiers but the signal processing is totally different, 8250 does everything is digital domain which results in flatter frequency response and steeper crossover filters which may sound slightly different to the analogue model. But if you are asking about the A/D conversion, it won't cause any audible difference between these models. But why wouldn't you use GLM with 8250, if you don't mind me asking?