Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8010A IsoPod table stand tilt capability

telstar, modified 6 Years ago.

8010A IsoPod table stand tilt capability

Youngling Posts: 2 Join Date: 8/28/15 Recent Posts
Hello,

I've just purchased my first Genelec speakers (a pair of 8010A); gotta start somewhere :D

My question: I'm not sure how to manipulate the IsoPod to get it to have the speaker tilt. I've moved the feet forward & backward and do not seem to have any luck tilting the speakers significantly. What am I doing wrong?

BTW, I am using these monitors with my road gig kit and I'm not sure that I can even get the IsoPods to tilt sufficiently. Can any one suggest any speaker stands that travel well and would be ideal for these little guys 8010A.

Thanks for your insights.

Best regards.......
ilkka-rissanen, modified 6 Years ago.

Re: 8010A IsoPod table stand tilt capability

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Enabling the tilt feature doesn't require any special tricks, you just move/slide the IsoPod to desired direction. You should notice that the maximum tilt for the 8010 model is about 7 degrees down and 12 degrees upwards direction. If you need more tilt, I would recommend a pair of our table stands.

http://www.community.genelec.com/news/4 ... 20A-8020B/

http://www.genelec.fi/webshop/loudspeak ... 6010a.html
telstar, modified 6 Years ago.

Re: 8010A IsoPod table stand tilt capability

Youngling Posts: 2 Join Date: 8/28/15 Recent Posts
Thanks Ilkka for the update and reference material. I see that I'll likely need stands to raise the speakers up. Best regards.....