Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

M030 and IsoAcoustics stands

zephonic, modified 5 Years ago.

M030 and IsoAcoustics stands

Youngling Posts: 11 Join Date: 5/29/15 Recent Posts
Hello,

I did a forum search but could not find the answer to this question:

I see that the M-series have their port in the base of the enclosure. Do they need to be placed on a flat surface to function as intended?
I have a set of IsoAcoustic stands for my monitors, to get the tweeters to ear-level, and wonder whether they can be used with the M030, or whether I'd need to put a flat plate between the speaker and the stand? If so, what material would be best?
Thanks.
ilkka-rissanen, modified 7 Years ago.

Re: M030 and IsoAcoustics stands

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

M-series speakers do not require a flat surface below them, so you can use them with IsoAcoustics stands without any problems.
zephonic, modified 7 Years ago.

Re: M030 and IsoAcoustics stands

Youngling Posts: 11 Join Date: 5/29/15 Recent Posts
Great, thank you!