Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Needle holes on 1032 drivers?

nfsmax, modified 6 Years ago.

Needle holes on 1032 drivers?

Youngling Posts: 1 Join Date: 3/9/15 Recent Posts
Hi guys,

I didn't realized until somebody approached me saying he found holes on his Genelec 1032 drivers.
I saw mine and wow, it's the same. Very tiny holed forming a circle in the middle of the bass driver. It's like someone poked it with a needle, but orderly..

Does anyone know why is it like this? Thanks
ilkka-rissanen, modified 8 Years ago.

Re: Needle holes on 1032 drivers?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts

They are not needle holes (which would be bad!) but small dimples which are a locating feature for the dust cap. So, perfectly normal feature. :)