Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8240 with 7350

paulrab, modified 7 Years ago.

8240 with 7350

Youngling Posts: 2 Join Date: 2/19/13 Recent Posts
I did a lot of GLM research, but cannot figure out if it's possible to use a 8240 monitor with the new 7350 sub in a 2.1 setting. 150W of bass power seems to be enough for my needs. I prefer the 8240 cause I'm used to the 8040's.
ilkka-rissanen, modified 7 Years ago.

Re: 8240 with 7350

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi there,

8240 is not recommended to use with 7350 subwoofer because the bass management won't work correctly between these models. This will lead to uneven bass response.

8240 should be used with 7260, 7270 or 7271 DSP range subwoofers. It can also be used with 7060, 7070, 7071 or 7073 analogue range subwoofers.