Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8330: acoustic screen and Auro-3d

kabile, modified 8 Years ago.

8330: acoustic screen and Auro-3d

Youngling Posts: 2 Join Date: 4/7/15 Recent Posts
Is SAM able to correct the properties of an acoustic screen (8000 Hz -3db, 15000Hz -5db)? When I use my AV Preamplifier to correct the three ones behind the screen, I can´t use SAM for the other loudspeakers (10.1 Auro-3d)! Is the software of SAM able to handle the height and top loudspeaker?
ilkka-rissanen, modified 8 Years ago.

Re: 8330: acoustic screen and Auro-3d

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

The AutoCal calibration inside the SAM speakers is able to compensate for the HF drop caused by an acoustically transparent screen (although -5 dB at 15 kHz doesn't sound very transparent??). One might need to adjust the settings manually after the automatic EQ in order to ensure a flat response.

GLM software is able to handle a full Auro3D setup including height and top (voice of God) speakers.