Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Painting 7071a sub

rpro, modified 7 Years ago.

Painting 7071a sub

Youngling Posts: 2 Join Date: 4/22/13 Recent Posts
I purchased another 7071a for my studio but this time it is used and a bit beat up with gouges and paint chips and scuff marks in the MDf frame. There are no dents in the metal or the grills. Can anyone recommend the type of paint and color that I can use to repaint after I repair the gouges?

Thanks
ilkka-rissanen, modified 7 Years ago.

Re: Painting 7071a sub

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

The paint and colour we use are industrial types which are not available for consumers. Your best option is to go to your local paint store and ask them to mix a few options which you will then compare to your subwoofer to find the best match. Normal household water-based paints are good enough for the purpose. A proper spray gun should be used for a good result.