Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Bolts for iso-pod on a 6010b

rummelsounddesign, modified 7 Years ago.

Bolts for iso-pod on a 6010b

Youngling Posts: 1 Join Date: 3/23/14 Recent Posts
I seem to have misplaced the bolts that attach the iso-pod stand to my 6010b speaker. Does anyone happen to know what size they are or where to find official replacements? I can't seem to find anything in the documentation.

Thanks.
klaus, modified 7 Years ago.

Re: Bolts for iso-pod on a 6010b

Youngling Posts: 10 Join Date: 4/2/10 Recent Posts
Hi,

you need screws with a head diameter of approx. 10mm, the thread is M4, screw length is 10mm.
For example Flanged Button Head Bolts M4x10

Klaus