Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 8250A - Studio Setup

swonkmusic, modified 7 Years ago.

Genelec 8250A - Studio Setup

Youngling Posts: 4 Join Date: 3/2/15 Recent Posts
Hello everyone ...

This is my first post here, finally I added Genelec into my equipments.

I just bought a pair of 8250A + GLM AutoCal.

By following the instructions in the "Monitor Setup Guide 2013", I calculated and designed the new positioning of the speakers and the listening point, which I think might be suitable for the structural characteristics of my recording studio.

Some of you, certainly more experienced than me in this specific area, could tell me if the measures that I have written in the PDF attached are correct, or give me some further indication to improve this?

If you need more information, please ask me!

Thanks in advance.