Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec One rear surround wiring

timlo, modified 7 Years ago.

Genelec One rear surround wiring

Youngling Posts: 1 Join Date: 11/29/14 Recent Posts
Hello
I have AC hum problem with wiring Genelec One rear surround speakers. My receiver is Yamaha RX-V777.
It would be nice to get to know other members' experiences of how you have solved the problem.

Timlo from Finland
ilkka-rissanen, modified 7 Years ago.

Re: Genelec One rear surround wiring

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Typically it is a problem of a bad quality unbalanced cable. Change to a better quality (good insulation) cable and the problem should go away.
joerggermany, modified 7 Years ago.

Re: Genelec One rear surround wiring

Padawan Posts: 36 Join Date: 12/23/13 Recent Posts
... so it is. You need somthing like this to go symmetrical and
you have no Problem any more.

http://www.funk-tonstudiotechnik.de/SYMM-VERST.htm

Gruss Joerg