Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Small Stands for M040?

beatsyd, modified 9 Years ago.

Small Stands for M040?

Youngling Posts: 10 Join Date: 2/4/14 Recent Posts
Just bought a pair of M040's. Can anyone recommend some small stands? I have a pair of M030's with the ISO pads on my desk. I also have 2 K&M 232BK but I need a plate for the foam to sit on but can't seem to find anything suitable.
beatsyd, modified 9 Years ago.

Re: Small Stands for M040?

Youngling Posts: 10 Join Date: 2/4/14 Recent Posts
To add....I also have the ISO pads for the M040's
beatsyd, modified 9 Years ago.

Re: Small Stands for M040?

Youngling Posts: 10 Join Date: 2/4/14 Recent Posts
Think I've found the answer in another post - I just have the speakers sitting on the metal (on the K&M 232BK) and don't use the foam? If I still wanted to angle up would I just have to buy another paid of ISO pads?
ilkka-rissanen, modified 9 Years ago.

Re: Small Stands for M040?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Yes, that is correct. Please this thread for more information about the correct use of IsoPad: viewtopic.php?f=11&t=1421
beatsyd, modified 9 Years ago.

Re: Small Stands for M040?

Youngling Posts: 10 Join Date: 2/4/14 Recent Posts
Thanks Ilkka, do you know if it it possible to purchase just the metal plate without the foam pads for the M040? This way I could have the stands with the metal, then the foam, then the other metal plate to angle the speaker up.
hwfa, modified 8 Years ago.

Re: Small Stands for M040?

Youngling Posts: 1 Join Date: 2/17/15 Recent Posts
If I still wanted to angle up would I just have to buy another paid of ISO pads?