Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8260 digital and analog input

joerggermany, modified 7 Years ago.

8260 digital and analog input

Padawan Posts: 36 Join Date: 12/23/13 Recent Posts
Hi,

i have a question to the stored correction i made with the GLM.
In my configuration i use the digital Interface of my 8260 for digital
sources and the analog Input for analog Sources. They Play from
the analog Input and if i start the digital Source the 8260 switches
to the Digital Interface. This ist OK because I do not use a permanent Connection
to GLM and Mac.

But, do the 8260 use the stored Correction for both analog and digital
Input? What about the stored Mastervolume. I stored at -12db in
digital Mode. Is ist the same in analog Mode?

gruss Joerg
ilkka-rissanen, modified 7 Years ago.

Re: 8260 digital and analog input

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Joerg,

The 8260 will use same stored calibration and master volume for both inputs.
joerggermany, modified 7 Years ago.

Re: 8260 digital and analog input

Padawan Posts: 36 Join Date: 12/23/13 Recent Posts
Thank you
for your fast reply.

Gruss Joerg