Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

The frequency response on M series

adriantatar, modified 9 Years ago.

The frequency response on M series

Padawan Posts: 29 Join Date: 5/27/14 Recent Posts
Hy

I have a pair of M030 and I want to know if the frequency response that is on the manual it`s individual measure four the each speaker? On my box I have received a speaker made in 05/2013 and the measurement on the manual it was made in 03/2013. In the manual of M series that u can download from the http://www.genelec.com/products/m030/ is a diferent frequency response graph.

All the best
ilkka-rissanen, modified 9 Years ago.

Re: The frequency response on M series

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

It is not an individual measurement. All data is subject to change and therefore the online operating manual has been updated with more recent frequency response measurement. Printed manuals will be updated later too.
adriantatar, modified 9 Years ago.

Re: The frequency response on M series

Padawan Posts: 29 Join Date: 5/27/14 Recent Posts
If the 8030B has a precision of +/- 3db from 58 Hz - 20 kHz the M series what precision they have ?
ilkka-rissanen, modified 9 Years ago.

Re: The frequency response on M series

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Actually 8030B is +/- 2 dB: http://www.genelec.com/products/8030b/

M series speakers are specified as +/- 3 dB, but their typical tolerance is +/- 2 dB.