Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

1035 vs 1036

mrinsatiable, modified 9 Years ago.

1035 vs 1036

Padawan Posts: 30 Join Date: 12/9/09 Recent Posts
After looking at the specs for the two different units..the power from the amps to the speakers look the same as well as the dcw and crossovers. Are the difference between the two models of 1035 vs 1036 the size of the cabinet and size of the drivers? one being 15" and the other being 18"?
ilkka-rissanen, modified 9 Years ago.

Re: 1035 vs 1036

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Yes, that is correct. LF extension is 26 Hz for 1035B and 17 Hz for 1036A (-6 dB) and that is achieved with larger woofers and cabinet.