Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Refoaming 1037b midrange driver

harry-r, modified 8 Years ago.

Refoaming 1037b midrange driver

Youngling Posts: 2 Join Date: 1/28/14 Recent Posts
Hi, my foam surrounds on midrange drivers (1997) have been destroyed because of old age. I want to restore them myself . Can Genelec sell new foam surrounds for this model and what is their part number? Thanks
ilkka-rissanen, modified 8 Years ago.

Re: Refoaming 1037b midrange driver

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Harry,

Unfortunately we do not sell new foam surrounds. In fact we don't replace the foam surround but the whole cone assembly or in some cases the whole driver. And this has do be done by a qualified service technician because the procedure is difficult.

Please contact you local distributor for more information: http://www.genelec.com/shop/distributors-network/