Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM 1.5.0 problem

mb-genelec, modified 8 Years ago.

GLM 1.5.0 problem

Youngling Posts: 10 Join Date: 5/21/13 Recent Posts
Dear Ilkka,
I updated to GLM 1.5.0. on MacMini/Maverick. Appears to be stable. However, if I want to start GLM via the setup file (either auto folder or manual), the loudspeaker network is not detected. I have to launch GLM manually (no network detection problem) and load the setup file. This has not been a problem with 1.4.x.
Thanks for comment/advice !
mb-genelec, modified 8 Years ago.

Re: GLM 1.5.0 problem

Youngling Posts: 10 Join Date: 5/21/13 Recent Posts
.... there are apparently some other problems. Volume presets do not go to the defined value x but apparently x-1 dB or x-0.5 dB :o The default value is then also changed... This occurs if one clicks on the "1", "2", etc. in the "preset level" field. Clicking on "1", "2", etc in the "level" field, provokes the same, i.e. volume goes to -49 dB if it should go to -50; however, the default value as such appears not to change.
Is there something like a bug report page ?
Regards, Michael

PS: The system is MacMini + 8260 in stereo; only using digital audio input; power mate and keyboard volume control.
ilkka-rissanen, modified 8 Years ago.

Re: GLM 1.5.0 problem

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Michael,

Thank you for information, I have passed it on to our software development team. There is no separate bug report form but this thread/forum will do just fine.
dr-wu, modified 8 Years ago.

Re: GLM 1.5.0 problem

Youngling Posts: 6 Join Date: 5/11/09 Recent Posts
After updating to 1.5 my power mate does not work anymore. At first it was moving the volume slider in micro amounts for a couple of seconds and then it stopped completely.
Thats on a Macpro running the latest version of Mavericks.
:cry: :cry: