Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8020C stand by mode

rsound, modified 8 Years ago.

8020C stand by mode

Youngling Posts: 1 Join Date: 5/17/14 Recent Posts
Hi there just got a pair of 8020C's, the stand by mode seems to be very random ie when it goes into this mode, also coming out of this mode can sometimes be a bit 'sticky' with one or both monitors taking a bit to become active.....is this normal ???
bourne, modified 8 Years ago.

Re: 8020C stand by mode

Padawan Posts: 74 Join Date: 2/26/14 Recent Posts
I don't have these speakers, however, from reading a couple of other Genelec manuals it seems, that ISS turns off the speakers after 1 hour without signal.
ilkka-rissanen, modified 8 Years ago.

Re: 8020C stand by mode

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi there just got a pair of 8020C's, the stand by mode seems to be very random ie when it goes into this mode, also coming out of this mode can sometimes be a bit 'sticky' with one or both monitors taking a bit to become active.....is this normal ???

Hi,

Can you provide more accurate information? What do you mean by "random" and "a bit"?