Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM 1.4.3 Window Locks in W7 on secondary monitor

jjay, modified 9 Years ago.

GLM 1.4.3 Window Locks in W7 on secondary monitor

Youngling Posts: 14 Join Date: 12/18/13 Recent Posts
I am new to the forum, first post.

I am curious if anyone else has seen this issue with the GLM window get stuck in a location on an extended monitor.

My system specs are below.

I have two monitors, stacked bottom (#1) and top (#2), and then extend the displays.

Display #1, on the bottom, is primary and has the windows task bar, #2, on top is bare.

If I drag and drop the GLM window up to the second monitor, the GLX window gets stuck and I can't move it. The Opt. db Display gets stuck as well.

The GLM functions all work, however, I have to "close" the app from the task bar and restart to get in back on display 1 and moveable.

If I extend the 2 second monitor, side by side, the GLM window does not get stuck when I drag it side ways on the second monitor.

Is this the proper place to post these issues?


Operating System
Windows 7 Professional 64-bit SP1
CPU
Intel Xeon W3680 @ 3.33GHz 32 °C
Westmere-WS 32nm Technology
RAM
24.0GB Triple-Channel DDR3 @ 668MHz (9-9-9-24)
Motherboard
ASUSTeK Computer INC. P6X58-E-WS (LGA1366) 30 °C
Graphics
SAMSUNG 46" LED (1920x1080@60Hz)
SAMSUNG 46" LED (1920x1080@60Hz)
1279MB NVIDIA GeForce GTX 470 (Gigabyte) 45 °C
Hard Drives
932GB Western Digital WDC WD1002FAEX-00Y9A0 ATA Device (SATA) 31 °C
932GB Western Digital WDC WD1002FAEX-00Z3A0 ATA Device (SATA) 30 °C
119GB M4-CT128M4SSD2 ATA Device (SSD)
119GB M4-CT128M4SSD2 ATA Device (SSD)
238GB Samsung SSD 840 PRO Series ATA Device (SSD) 35 °C
932GB Western Digital WDC WD1001FALS-00J7B1 ATA Device (SATA) 32 °C
56GB OCZ-VERTEX2 ATA Device (SSD) 30 °C
Optical Drives
ASUS DRW-24B1ST ATA Device
jjay, modified 9 Years ago.

Re: GLM 1.4.3 Window Locks in W7 on secondary monitor

Youngling Posts: 14 Join Date: 12/18/13 Recent Posts
I moved my "main monitor" back to the top position (#1 on top of #2)... this resolves this issue in this configuration.
ilkka-rissanen, modified 9 Years ago.

Re: GLM 1.4.3 Window Locks in W7 on secondary monitor

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

This is a known issue. Some graphical libraries inside the software have problems with negative coordinates. You should avoid configuring secondary monitor on the left or top side of the main monitor.