Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Refoaming vintage 1019 A

bernard, modified 8 Years ago.

Refoaming vintage 1019 A

Youngling Posts: 2 Join Date: 1/2/14 Recent Posts
I want to make a refoaming on an vintage 1019A, the foam of the bass loudspeaker is dead , I want to make e refoaming myself !
Can you help me about the brand of the loudspeaker used by Genelec (1986 ou 1987) or the solution to have any information to change for a new foam (web site by exemple).
Many thanks.
Bernard
ilkka-rissanen, modified 8 Years ago.

Re: Refoaming vintage 1019 A

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

We sell a new foam surround for the woofer but you need to contact your local distributor for the price and availability: http://www.genelec.com/shop/distributors-network/

Part number: V42-0501, 5" foam surround
bernard, modified 8 Years ago.

Re: Refoaming vintage 1019 A

Youngling Posts: 2 Join Date: 1/2/14 Recent Posts
Thanks for your reply, I will try to contact my french distributor, or if impossible to have this part I saw
some web site with similar foam.
Thanks again for your help, and best wish for 2014.
Bernard