Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Touch up paint for 8040

adamdea, modified 10 Years ago.

Touch up paint for 8040

Youngling Posts: 3 Join Date: 4/17/13 Recent Posts
I have a rather scratched pair of 8040s. They are very dark grey. I was looking to find some matching touch up paint.
I saw from
http://helpdesk.genelec.com/index.php?/ ... lour-codes
that the paint is described as 8000- series grey: PULVERLAC 4220203406
I cannot find any reference to this paint code on the internet. Do you know how i could buy some, or at least whether it corresponds with any generally understood colour (eg on the RAL chart) so how I can source (UK).
ilkka-rissanen, modified 10 Years ago.

Re: Touch up paint for 8040

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

That is the code for the original powder coating process. Unfortunately we don't have information about a matching touch up paint.
matztam, modified 8 Years ago.

Re: Touch up paint for 8040

Youngling Posts: 1 Join Date: 9/17/15 Recent Posts
Is it possible to get some paint to the 8040A`s?
Would be nice to fresh them up and get rid of some scratches.
Any recomenndations?