Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 1030A

shane214, modified 10 Years ago.

Genelec 1030A

Youngling Posts: 2 Join Date: 2/18/13 Recent Posts
I recently bought my First set of used Genelecs they are the 1030A's I know they are no longer made. I just a have a small question if someone could please help me. My 1030A's have switches on the back of them the positions on them go from on to off I don’t think they go between. I am in a small Room and it is acoustically treated not quite 100% sound proof but most reflections are under control. Can someone please tell me a great starting point on the switch settings? Like I said the switches have off and on. Thank you for reading this. Shane
ilkka-rissanen, modified 10 Years ago.

Re: Genelec 1030A

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Shane,

This would be a great starting point: http://www.genelec.fi/documents/opmans/OM1030a.pdf :)
shane214, modified 10 Years ago.

Re: Genelec 1030A

Youngling Posts: 2 Join Date: 2/18/13 Recent Posts
Thank You So Much