Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Recone 1030

paracueo, modified 10 Years ago.

Recone 1030

Youngling Posts: 1 Join Date: 2/5/13 Recent Posts
Hello everybody,

a few days ago we realized our 1030 left speaker was noizy on bass drums and bass attack.. we thought something was vibrating around the room so we removed everything on the monitor shelve but it was from the speaker. So we discovered a cut on the gum circle round the cone, upright, about 2 cm long.

We dunno so much about cones and our monitors are no longer produced. We're based in Venice, Italy.

Any suggestion is strongly appreciated, don't wanna loose those amazing speakers.


thanks a lot,
Luca
ilkka-rissanen, modified 10 Years ago.

Re: Recone 1030

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Luca,

recone kits for 1030A woofer are not available but complete woofers are. You should contact your local distributor for further information. It might be wise to change both woofers at the same time.

Don't worry, your speakers will be ok in no time! :)

Leading Technologies s.r.l.
54, Via Solferino, I-20052 Monza (mi), Italy
T + 39 039 94 15 200
F + 39 039 21 03 506