Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

1031A overload light coming on way to easy

bhang, modified 9 Years ago.

1031A overload light coming on way to easy

Youngling Posts: 1 Join Date: 1/30/13 Recent Posts
Hello everyone,
I hope this is the appropriate place to post a question such as this.
I have 4 1031A's and one of them shows overloading at fairly low volumes. I don't hear any clipping/ distortion, its just that the red overload light comes on at a far lower SPL than the other 3.
Has anyone else experienced this issue or have an idea of what might be going on?
Any advise is appreciated.
- Jeremy
ilkka-rissanen, modified 9 Years ago.

Re: 1031A overload light coming on way to easy

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Jeremy,

it is difficult to say what might be the failed component that causes this issue, but it is obvious that in order to fix it, your speaker needs professional service. Please contact your local distributor for further information.