Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 1029 with Oppo 93 configuration

edumatas, modified 10 Years ago.

Genelec 1029 with Oppo 93 configuration

Youngling Posts: 1 Join Date: 5/2/12 Recent Posts
Hello sirs.
Sorry for my english, I am from Barcelona, Spain.
Actually I have 5 1029A with a 7050A sub connected directly with XLR to RCA to my Oppo 93 analog outputs, the sub connected to the Oppo LFE output.
Anybody have the same configuration with an Oppo? I have all 1029 dip switches on bass roll-off (switch 2) and the Oppo with Small speakers and the crossover on 80Hz. Its correct or you suggest me another best configuration?

Thanks a lot.
Eduard.
ilkka-rissanen, modified 10 Years ago.

Re: Genelec 1029 with Oppo 93 configuration

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi Eduard,

Connections are correct but you shouldn't engage the bass roll-off switch because it is used to roll-off the bass when no external bass management is used. And that's what the OPPO is doing when speakers are configured small with 80 Hz crossover.