Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 6010A EQ control besides the title control?

raaannn, modified 10 Years ago.

Genelec 6010A EQ control besides the title control?

Youngling Posts: 1 Join Date: 8/13/12 Recent Posts
3 small pots in 3 holes besides the title control
What do they do? Are they meant for calibration purpose?
What if I messed it up? How do I reset it to factory setting?
ilkka-rissanen, modified 10 Years ago.

Re: Genelec 6010A EQ control besides the title control?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Those trimmers are meant for factory calibration and should not be touched by the end-user. If you have touched them, you will have to deliver the unit to your local Genelec service central where the factory calibration can be restored.

Where are you located at?