Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

7050A / 7050B cases

johyde, modified 10 Years ago.

7050A / 7050B cases

Youngling Posts: 2 Join Date: 5/9/12 Recent Posts
Hi.

Slightly obscure question here, but I'd be very grateful for any help.

I have a 7050A sub with a damaged case (front wooden panel, specifically).

I recently saw advertised for spares a 7050B case.

My question is simple - are the front panels (I'm talking the whole big piece of wood) for these two subs identical in dimensions?

Thanks!
ilkka-rissanen, modified 10 Years ago.

Re: 7050A / 7050B cases

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

The wooden panels are not interchangeable between 7050A and 7050B.
johyde, modified 10 Years ago.

Re: 7050A / 7050B cases

Youngling Posts: 2 Join Date: 5/9/12 Recent Posts
Thanks for the prompt reply Ilkka - I appreciate it!