Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Anti Bump

fabiotto70, modified 10 Years ago.

Anti Bump

Youngling Posts: 3 Join Date: 5/6/12 Recent Posts
Hello all
I wanted to submit a problem that I encountered in my studio.
when I turn on the console to start working I hear a booom.
when I turn off the console i hear a sweep.
how can I solve this problem without shutting down every time the monitors?
my setup is genelec 1030A +7060A
let me know
Thank you in advance
ilkka-rissanen, modified 10 Years ago.

Re: Anti Bump

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

Unfortunately there is no easy solution for this problem since it is the console which is producing the noise. If the speakers are connected to it and on, they will produce any noise the console makes. You would need a line level switch or similar device which you could turn on after you have powered on the console. Unfortunately I am no expert when it comes to that kind of devices but hopefully some other member will chime in. :)