Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Different dip switches settings on 8030... ?

darkstar, modified 10 Years ago.

Different dip switches settings on 8030... ?

Youngling Posts: 5 Join Date: 2/7/12 Recent Posts

Well, I work in home studio and due to limited space, I have one speaker against a wall, and another in the corner. So, you suggested in manual that there are 2 different dip switch positions for those situations, so my question would be :

Is it okay to use different dip switches on each monitor?

ilkka-rissanen, modified 10 Years ago.

Re: Different dip switches settings on 8030... ?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts

It is perfectly acceptable and actually recommended to use different dip switch settings.