Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Horizontal vs Verticle Monitoring Configuration ?

supousa, modified 10 Years ago.

Horizontal vs Verticle Monitoring Configuration ?

Youngling Posts: 2 Join Date: 2/8/12 Recent Posts
I am getting my Genelec's S30D's recabineted (is that a word) and have the option to go with a Horizontal or a Verticle configuration. Can I get some feedback on the pros and cons, good or bad, right or wrong with regard to whether I should get a verticle configuration (and why) or a horizontal configuration (and why). I'm not too educated on such matters. These will be my main pair and only pair of monitors. I really appreciate your contributions to this topic.
ilkka-rissanen, modified 10 Years ago.

Re: Horizontal vs Verticle Monitoring Configuration ?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

Please see this document on the subject. Don't hesitate to ask further information! :)

http://www.genelec.com/faq/acoustical/m ... sitioning/