Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Trim pots near dip switches

tiago, modified 11 Years ago.

Trim pots near dip switches

Youngling Posts: 1 Join Date: 1/12/12 Recent Posts
Hi,
Both my 8040s and 8020 have visible recessed white plastic trim pots near the dip switches for the FR control.
What's their function?
Kind regards,
Tiago
ilkka-rissanen, modified 11 Years ago.

Re: Trim pots near dip switches

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

Those trimmers are for factory calibration purposes. User must not touch these controls.