Message Boards

GLM Volume Master Level setting

lg251, modified 10 Years ago.

GLM Volume Master Level setting

Youngling Posts: 6 Join Date: 8/1/10 Recent Posts
Hey,

Whenever I Store Acoustic Settings with Full Master Level (I set my main fader to -25db) and save it, everything is fine. My 8250's have the volume I'm used to work with in Logic and Mac OSX.
Though every time I shut down and/or restart the computer, I have to re-open GLM and do that again, or the speakers volume is just too high. (The main fader in GLM goes back to -15db every time).

Is this a common issue? Have I missed something and I'm doing it wrong?

Thank you for your time,

LG
ilkka-rissanen, modified 10 Years ago.

Re: GLM Volume Master Level setting

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

Once you set the main fader to -25 dB, you need to select "Set GLM startup level" from the setup menu. After that the startup level stays where you want it.

If you want to use the speakers in standalone mode, set the main fader to -25 dB and select "Store acoustic settings to all online loudspeaker (with current master level) and unplug the GLM interface from the computer.
lg251, modified 10 Years ago.

Re: GLM Volume Master Level setting

Youngling Posts: 6 Join Date: 8/1/10 Recent Posts
Hey Ilkka,

I can't believe I had over read that part... :roll: I did as mentioned and everything is fine now!


Thank you,

LG