Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Some questions regarding DSP / room correction

fuzzyboy, modified 10 Years ago.

Some questions regarding DSP / room correction

Youngling Posts: 19 Join Date: 10/3/11 Recent Posts
I like the 8200-line in part because of the built-in DAC and in part because of the DSP :)

As far as room correction goes - how does the Genelec 8200 line compare to for instance the Lyngdorf RoomPerfect or similar systems?

Is room correction mostly relevant in the low/bass section or is it important in the mid/high section as well?
ilkka-rissanen, modified 10 Years ago.

Re: Some questions regarding DSP / room correction

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

I answered to your similar question here:

viewtopic.php?f=11&t=553

AutoCal corrects frequency response problems up to 2 kHz.
fuzzyboy, modified 10 Years ago.

Re: Some questions regarding DSP / room correction

Youngling Posts: 19 Join Date: 10/3/11 Recent Posts
Thanks :)