Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

1030A blowing fuses

themac, modified 11 Years ago.

1030A blowing fuses

Youngling Posts: 1 Join Date: 12/16/10 Recent Posts
I have a pair of much loved 1030A's and one of then is blowing the dc fuses on the power supply board. I was wondering if anyone would know why this is happening? maybe a shorted rectifier? Where can I get a schematic?

Any help would be greatly appreciated, thanks
ilkka-rissanen, modified 11 Years ago.

Re: 1030A blowing fuses

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hello,

I recommend that you send you speaker to a professional Genelec service point. Please find your local distributor here: http://www.genelec.com/sales-network/