Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

5.1 monitoring with surround array

tomaticz, modified 13 Years ago.

5.1 monitoring with surround array

Youngling Posts: 1 Join Date: 9/6/10 Recent Posts
Hello,
i own a couple of 1031a so i can produce a proper discret 5.0 monitoring.
Now i´d like to upgrade the monitors with a subwoofer (7070 in mind) and a surround array of 6 8020s, for producing a "non sweet spot surround field" since i work for cinematic clients doing sounddesign and premixes for cinema.
For any other purpose i can still build a 5.1 ITU circle with 5 1031.

What do you think about the solution with 6 8020 for a surround array?

Room dimension are: 4m x 5,76m x 2,75m, it´s professionaly, acousticly treated

Thanks everyone for suggesitons.