Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Changing the mains voltage on 8040

beatsandstyles, modified 13 Years ago.

Changing the mains voltage on 8040

Youngling Posts: 2 Join Date: 4/24/10 Recent Posts
I just brought 8040's from Finland to the US. Before plugging in I realized that there's no switch for the voltage.

Does anyone know if it's possible to find a switch to change the mains voltage setting on a 8040 (somewhere behind the back panels)? It's fairly common for manufacturers to have the different settings (230&110) under a switch for cheaper manufacturing costs.

I know I can always use a transformer...

Jaakko
dumbo, modified 13 Years ago.

Re: Changing the mains voltage on 8040

Padawan Posts: 78 Join Date: 12/20/09 Recent Posts
Don't take my word as gospel but I also bought the 7260 sub in Belgium and have the same problem using it in North America. Not only is there no voltage switch (a real PITA), since I don't want to add the noise of external voltage converter, I'm going to have to replace the entire transformer in order to use it in North America. I suspect you only have the option of either changing the transformer or using an external voltage converter as well.
beatsandstyles, modified 13 Years ago.

Re: Changing the mains voltage on 8040

Youngling Posts: 2 Join Date: 4/24/10 Recent Posts
Damn! I guess that's what I'll have to do...