Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM in demo mode?

kire, modified 12 Years ago.

GLM in demo mode?

Youngling Posts: 16 Join Date: 5/10/09 Recent Posts
In the latest community newsletter I saw that you can download GLM and run it in demo mode.
I do not yet have any DSP speakers (only 8040 & 7060) so what can I do with GLM in demo mode?

Thanks for your help.
ilkka-rissanen, modified 12 Years ago.

Re: GLM in demo mode?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

You can try it out and play with the program and its different settings. Obviously you can't use it to control your analogue speakers because they don't have the necessary DSP circuits nor inputs for the control network.

But once you are more comfortable with the GLM program, and have realized all the goodies it has, it's just a small step to upgrade your speakers with the equivalent DSP models (8240A and 7260A). 8-)
kire, modified 12 Years ago.

Re: GLM in demo mode?

Youngling Posts: 16 Join Date: 5/10/09 Recent Posts
Hi Ilkka,
OK, thanks for your reply,
can I actually do some measurements or is it all "Inside the computer"?
ilkka-rissanen, modified 12 Years ago.

Re: GLM in demo mode?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
No, you can't do any measurements without having actual DSP speakers and the GLM interface & microphone.
kire, modified 12 Years ago.

Re: GLM in demo mode?

Youngling Posts: 16 Join Date: 5/10/09 Recent Posts
OK thanks,
Well eventually i might be able to upgrade [hey, you should have a trade-in program! :-)]

Until then I'll have to stick to my analog speakers, that by the way, are my best investment ever!

I have some problems in one room that can't be treated (my living room). I've measured it as good as I can (using Room EQ Wizard) and I have a Behringer DEQ2496 (a digital 24-Bit/96 kHz EQ/RTA Mastering Processor) to apply a few parametric filters (< 135 Hz). It's It really makes a big difference. Would love to hear what GLM would do though...