Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Genelec 1030A Question

wiggin, modified 12 Years ago.

Genelec 1030A Question

Youngling Posts: 1 Join Date: 4/26/10 Recent Posts
My apologies if this not the correct board for this question, but I'm having an issue with one of the Genelec 1030A speakers in my home theater system. Whenever it has sound running to it I can hear a very faint, steady beeping. The beep does not change when I raise the volume of the speaker and disappears when I cut power to the unit. The other speakers in the system have no issues. Is the beep some sort of alert? And if so, how do I address it?

Thanks in advance.
ilkka-rissanen, modified 12 Years ago.

Re: Genelec 1030A Question

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts

Our foorum header says "The Genelec Community Forum is mainly meant for conversations between users, but authorized Genelec staff can take part in conversations from time to time. In case you have a technical problem with your product that requires service or maintenance, please contact your local distributor's service center for advice and support first.

You can find your local distributor from here: