Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

reconing 1038B mid driver

edi-72, modified 13 Years ago.

reconing 1038B mid driver

Youngling Posts: 2 Join Date: 4/9/10 Recent Posts
holla,

i buy pair of 1038B used pro monitor with broken mid driver (cone, surroundfoam, may voicecoil too), pls let me know where to buy reconing kit (just recone kit, i can fix that) in ebay or online store for DIY replace them, so i need info type and size cone and foam surround for replace local part if posibble, Thx

Regard
Edi
ilkka-rissanen, modified 13 Years ago.

Re: reconing 1038B mid driver

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
holla,

i buy pair of 1038B used pro monitor with broken mid driver (cone, surroundfoam, may voicecoil too), pls let me know where to buy reconing kit (just recone kit, i can fix that) in ebay or online store for DIY replace them, so i need info type and size cone and foam surround for replace local part if posibble, Thx

Regard
Edi

Holla Edi,

You should contact the distributor in your country. They will be able to give you more information about the recone kit.

http://www.genelec.com/sales-network/
edi-72, modified 13 Years ago.

Re: reconing 1038B mid driver

Youngling Posts: 2 Join Date: 4/9/10 Recent Posts
thx for reply

problem solved

regard
edi
harry-r, modified 9 Years ago.

Re: reconing 1038B mid driver

Youngling Posts: 2 Join Date: 1/28/14 Recent Posts
Hi Edi, do you still possess broken mid drivers? I could buy one driver or only its magnet part, if it is non broken. Let me know please, if you can sell. Thanks. Igor.