What mic stand best for GLM mic ? - Forum
Thank you for all the years of Community discussions and activity!
The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.
If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.
Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.
We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.
Genelec Support
andreas, modified 13 Years ago.
What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts I feel the need to buy a mic stand, as my sofa is in the way, and I have not figured out what mic stand is shown in the GLM photo ?
What mic stand is recommended for the GLM mic ? How to attach the GLM mic then with that foam thing, if I cannot use that stand in the picture above ? Right now I use two tiny pillows to hold the mic and to decouple it. As my last two 8240s arrived today to complete the set of 5, I want to do the measurement professionally
What mic stand is recommended for the GLM mic ? How to attach the GLM mic then with that foam thing, if I cannot use that stand in the picture above ? Right now I use two tiny pillows to hold the mic and to decouple it. As my last two 8240s arrived today to complete the set of 5, I want to do the measurement professionally
1038, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Jedi Master Posts: 340 Join Date: 4/6/09 Recent Posts
Just did a little looking around the site i posted and found this...http://www.k-m.de/en/products/category/universal-joint-1/mode/productview/product/19695-100-55/new/0/?no_cache=1&hidesndlevel=0
This fitted to......
http://www.k-m.de/en/products/category/topline-34/mode/productview/product/21020-300-01/new/0/?no_cache=1&hidesndlevel=0
Is what you need.
ilkka-rissanen, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts Hi,
The GLM package comes with a rubber piece that has two holes: the other one holds the mic and the other one fits to a standard mic screw thread. That should hold the mic quite firmly.
The GLM package comes with a rubber piece that has two holes: the other one holds the mic and the other one fits to a standard mic screw thread. That should hold the mic quite firmly.
andreas, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts Thx Illka,
so I will simply get a nice K+M stand with an arm and know now it fits somehow. I may order online and as stupid as it may have sounded, but I never had a mic stand before
so I will simply get a nice K+M stand with an arm and know now it fits somehow. I may order online and as stupid as it may have sounded, but I never had a mic stand before
1038, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Jedi Master Posts: 340 Join Date: 4/6/09 Recent Posts If you want to use a boom, you will need the universal adaptor i linked to get the mic vertical again.
GLM comes with the rubber mic clamp which pushes onto a standard 3/8 mic thread.
In the picture you linked originally, it is simply a standard mic stand showing the rubber GLM mic clamp and mic.
Here is the pic of the adaptor from K&M's web site. In the description it states that the adaptor is supplied with a 1/4" and 3/8" male thread.
Hope this helps. I will go and try and source one of these adaptors for my use.
GLM comes with the rubber mic clamp which pushes onto a standard 3/8 mic thread.
In the picture you linked originally, it is simply a standard mic stand showing the rubber GLM mic clamp and mic.
Here is the pic of the adaptor from K&M's web site. In the description it states that the adaptor is supplied with a 1/4" and 3/8" male thread.
Hope this helps. I will go and try and source one of these adaptors for my use.
andreas, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts Thx Steve, all clear now 
andreas, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts Hi Steve,
the stuff came today. The 210 K+M stand is a bit high. I would recommend from the experience of today a lower one, but will keep it. The joint would be even better, if it could compensate more than 90 degrees upwards. That spare silver thread in the joint fits into the GLM foam hole, otherwise the foam hole would be too big and the foam will not fit the joint's screw.
the stuff came today. The 210 K+M stand is a bit high. I would recommend from the experience of today a lower one, but will keep it. The joint would be even better, if it could compensate more than 90 degrees upwards. That spare silver thread in the joint fits into the GLM foam hole, otherwise the foam hole would be too big and the foam will not fit the joint's screw.
1038, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Jedi Master Posts: 340 Join Date: 4/6/09 Recent Posts Hi Andreas,
I suppose i should have said a stand "like" this one, sorry that it was slightly high for your use Are you measuring at your seated ear height?
In most applications, the boom ends up with a slight rise, so the Universal joint doesn't need to extend past 90 degrees. You may be able to trip some material from the bottom of the stand, where it attaches to the feet?
I suppose i should have said a stand "like" this one, sorry that it was slightly high for your use
Are you measuring at your seated ear height?In most applications, the boom ends up with a slight rise, so the Universal joint doesn't need to extend past 90 degrees. You may be able to trip some material from the bottom of the stand, where it attaches to the feet?
andreas, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts No worries Steve. I will also obuse the stand for my colorimeters and my screen 
andreas, modified 13 Years ago.
Re: What mic stand best for GLM mic ?
Padawan Posts: 61 Join Date: 4/8/09 Recent Posts Jack, that goose neck looks sweet
Steve, I noticed I can simply turn the K+M ball head joint around and compensate for that slight negative angle I have towards my head/sweetspot with the tall stand. Cannot tell yet, if it makes any difference for the measurements and whether the joint/joint screw handle is too close that way to the mic to introduce any reflections of any significance. I do not think so, as with GLM one mostly measures long wavelength and I will give it a try with GLM that way later in the comming days. Here is a picture.
Steve, I noticed I can simply turn the K+M ball head joint around and compensate for that slight negative angle I have towards my head/sweetspot with the tall stand. Cannot tell yet, if it makes any difference for the measurements and whether the joint/joint screw handle is too close that way to the mic to introduce any reflections of any significance. I do not think so, as with GLM one mostly measures long wavelength and I will give it a try with GLM that way later in the comming days. Here is a picture.