Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Setting Tilt Controls?

falcon1, modified 12 Years ago.

Setting Tilt Controls?

Youngling Posts: 9 Join Date: 10/15/09 Recent Posts
What is the best way to safely adjust the tilt controls? Screwdriver or what? It is too far in for me to be able to adjust it with my fingers and I don't want to risk breaking it or something with wrong method. :shock:
ilkka-rissanen, modified 12 Years ago.

Re: Setting Tilt Controls?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts
Hi,

You can use a flat head screwdriver or some else similarly shaped object, metal or plastic - doesn't make a difference. Apply just enough force to change the dip switch position - no more or no less. :)