Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Turn on monitors with power bar?

workfire, modified 13 Years ago.

Turn on monitors with power bar?

Youngling Posts: 2 Join Date: 7/30/09 Recent Posts
Hello,
Is it okay to leave the power switch of all my monitors in the "on" position, and connect them to a power bar so I can turn them all on/off at once?
Thanks for your advise,
christophe-anet, modified 13 Years ago.

Re: Turn on monitors with power bar?

Jedi Knight Posts: 188 Join Date: 3/23/09 Recent Posts
Hello,

Thanks for your post. You can safely turn on/off all your Genelec monitors connected to a power strip - yes.
Best regards,