Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

8200A stand alone operation with 8040´s?

sanchezrk, modified 12 Years ago.

8200A stand alone operation with 8040´s?

Youngling Posts: 1 Join Date: 1/28/10 Recent Posts
Hello,
i work in a center of arts that tryies to set up a 5.1 system, they got: five 8040´5, a 7050B sub and a 8200A loudspeaker manager,
it seems that none of the systems work well together in the first place, but i would like to take out the best of it .
don´t know if the 8200A can be used in non DSP speakers

i would apreciate any help about it.

regards from mexico
christophe-anet, modified 12 Years ago.

Re: 8200A stand alone operation with 8040´s?

Jedi Knight Posts: 188 Join Date: 3/23/09 Recent Posts
Hello,

Thanks for your post. The GLM - Genelec Loudspeaker Manager - is a software designed to control our 8200 / 7200 Series DSP monitors via a proprietary control network.

The 8000 / 7000 Series Analog monitors feature analog inputs and cannot be controlled via our GLM control network.

If you need further help and support to setup your 5.1 system, do not hesitate to contact our distributor in Mexico:
http://www.genelec.com/sales-network/?c ... th+America

Best regards,