Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

An old amp into a pre-amp?

mikkelsson, modified 12 Years ago.

An old amp into a pre-amp?

Youngling Posts: 5 Join Date: 4/3/09 Recent Posts
Hi.

I read from another forum about a person who paid a visit to a Hi-Fi-fair, and asked a Genelec presentative how come there are no remote-controlled add-on to Genelec systems. The presentative told him about tweaking an old amplifier into a pre-amplifying unit, and Gelenec's website would contain the information how to. He couldn't find the instructions, and neither did I.

It is really hard to find a decent pre-amp with a remote control unit cheap, so if you have any information regarding the tweaking instructions, please share your knowledge.

P.S. Jos ohjeet saa suomeksi, aina parempi. Kytkentäkuvat aina plussaa!

Have a nice weekend! ;)
christophe-anet, modified 12 Years ago.

Re: An old amp into a pre-amp?

Jedi Knight Posts: 188 Join Date: 3/23/09 Recent Posts
Hello,

Thanks for your post. This is probably the FAQ my colleague was referring to(?). Check it out, this might be the solution you are looking for.

http://www.genelec.com/faq/applicable-t ... r-outputs/

Best regards,
mikkelsson, modified 12 Years ago.

Re: An old amp into a pre-amp?

Youngling Posts: 5 Join Date: 4/3/09 Recent Posts
Yes, I think this is the diagram I was looking for.
Thanks Anet!