Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Damaged 8040A HF drivers

digimatix, modified 13 Years ago.

Damaged 8040A HF drivers

Youngling Posts: 1 Join Date: 9/3/09 Recent Posts
Hello,
first of all I want to thank Genelec for the great products, I didn't have any problems with my A8040 until now. After recording session children :twisted: in the studio made from 10 to 15 holes in each HF driver. Is it possible to repair/change the damaged parts? Monitor's sound now differs from the same model in studio B (noticable lack of hi-mid range) :?
Thank you in advance and sorry for my...you know 8-)
Igor.
Kiev, Ukraine.
christophe-anet, modified 13 Years ago.

Re: Damaged 8040A HF drivers

Jedi Knight Posts: 188 Join Date: 3/23/09 Recent Posts
Hello,

Thanks for your kind message and sorry to hear about the damages that occured to your 8040A's. Of course holes in the HF diaphragms do not help reproducing accuractely high frequencies!....

As mentioned in our Forum header, service questions should be sent directly to our distributor's service centers for fast and efficient handling.

Please contact our distributor in Kiev for servicing your 8040A's. Thanks in advance.
http://www.genelec.com/sales-network/?c ... rea=Europe

Best regards,