Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Monitor stand Z8020-320B for G Two?

allanallan, modified 6 Years ago.

Monitor stand Z8020-320B for G Two?

Youngling Posts: 1 Join Date: 6/11/17 Recent Posts

Is the black colour of the Genelec Z8020-320B monitor stand similar to the black colour of the G Two speakers? I would like to purchase the stands, but I need to verify that the colour will be a good match.


Also, when using these stands, should the "table" setting be turned off?

ilkka-rissanen, modified 6 Years ago.

RE: Monitor stand Z8020-320B for G Two?

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts


Yes it is a good match as they both are black. The "tabletop" setting can typically be set off but of course you should still experiment and listen which setting sounds best in your application.