Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Few questions about 8330 flush mounting

hrg, modified 5 Years ago.

Few questions about 8330 flush mounting

Youngling Posts: 3 Join Date: 6/29/17 Recent Posts


Now I'm buliding my new control/linving room and trying mount my 8330 into the wall.

I've downloaded Drawing for 8330 flush mount picture, almost clear except 2 things:

1. What kind of material is between the monitor and the wall. Mineral wool?

2. What is the exact distance between the front of the monitor and the wall?


Thank you in advance.


markus-kahelin, modified 5 Years ago.

RE: Few questions about 8330 flush mounting

Jedi Knight Posts: 109 Join Date: 3/16/10 Recent Posts


1. Mineral wool or open cell foam plastic sheets, used for acoustic damping.

Thanks for spotting the missing dimension on the document. 

2. Dimension is approx. 60mm.


Best Regards, Markus

Genelec Support Team