Can I use 7350A sub with non-Genelec speakers ?

Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

shiroryu, modified 5 Years ago.

Can I use 7350A sub with non-Genelec speakers ?

Youngling Posts: 1 Join Date: 7/1/17 Recent Posts

Hello,

This is my first post. I am considering buying a Genelec 7350A sub to use with existing non-Genelec front speakers that do not have a high-pass filter.

Is it possible to have the 7350 outputs be filtered (typically with a 85Hz high-pass) ?

markus-kahelin, modified 5 Years ago.

RE: Can I use 7350A sub with non-Genelec speakers ?

Jedi Knight Posts: 109 Join Date: 3/16/10 Recent Posts

Hi!

This kind og use case is not supported by the features of 7350A subwoofer. Bigger models 7360A and 7370A offer a fixed 85Hz cross-over filtering for the analog outputs and this way can be used with 3rd party devices.

Best Regards, Markus

Genelec Support Team