Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

Subwoofer line

yunie6, modified 5 Years ago.

Subwoofer line

Youngling Posts: 6 Join Date: 8/14/17 Recent Posts

I've read that when you connect the signal from DAC>Subwoofer>Monitors, you can still get sound when the subwoofer is off.

May I know if this feature is available in 7040A as well? Also, which part in the operating manual actually says this? 

 

Thank you!

markus-kahelin, modified 5 Years ago.

RE: Subwoofer line

Jedi Knight Posts: 109 Join Date: 3/16/10 Recent Posts

Hi!

 

Only subwoofer that passes the signal to the outputs when turned OFF is the 7050A / 7050B. This model does not apply bass management filtering on the outputs. All other modes, including 7040A has no output on the connectors when powered OFF.

 

Best Regards, Markus

Genelec Support Team

yunie6, modified 5 Years ago.

RE: Subwoofer line

Youngling Posts: 6 Join Date: 8/14/17 Recent Posts
Thank you!