Genelec Community Forum has been archived

Thank you for all the years of Community discussions and activity!

The time has come for us to retire the community forums, but we will keep everything available for reading. There is a lot of valuable content written over the years, and you'll be able to access all of that. However, no new posts can be written, or old posts modified.

If you have questions, we recommend you use the Support function on the bottom right corner to contact our Customer Support directly.

Alternatively, if you wish to engage in a community discussion with other people, there are many active forums available. There is also an active, fan managed GENELEC COMMUNITY in Facebook, and many Genelec employees are active in the discussions there.

We are sorry for any possible inconvenience this may cause you, but we hope to hear from you through the other channels mentioned above.

Genelec Support

Message Boards

GLM 3.0 AutoCal Broken

kamb1ng, modified 5 Years ago.

GLM 3.0 AutoCal Broken

Youngling Posts: 6 Join Date: 3/24/17 Recent Posts

AutoCal is broken in GLM 3.0, accross both a Windows 10 PC and Mac OS High Sierra. I recently attempted to do another calibration of my speakers, and failed. During the process of AutoCal, room correction is not applied to all speakers that are measured. Correction is most of the time applied to one speaker, at best two. I always have 3-4 speakers with unaddjusted frequencies. The recorded frequencies also look very different to what they were in the past as well. I have 3x8351 and 2x8340. Adapter and speakers all up to date firmware wise.

I also attempted to run calibration on my older Macbook Pro running the older Sierra OS, using GLM 2.0. Same issue as with GLM 3.0. Have no idea what is happening. Any assistance would be appreciated.

kamb1ng, modified 5 Years ago.

RE: GLM 3.0 AutoCal Broken

Youngling Posts: 6 Join Date: 3/24/17 Recent Posts
I also noticed something in GLM 3 across both Windows and MacOS platforms. When attempting AutoCal, the microhpone correction is "8300A - 203828". Within the DSP/Microphones folder, i don't see this microphone listed, only variants of the '8200' microphone are in the folder. Another thing i noticed is that when i leave GLM on, the mic no longer pics up sound. Even with content playing, it reads a flat 28-29db SPL. So perhaps this issue is to do the with mic?
ilkka-rissanen, modified 5 Years ago.

RE: GLM 3.0 AutoCal Broken

Yoda Posts: 2564 Join Date: 3/23/09 Recent Posts

Please download and install latest GLM 3.0 Beta build 117 here.

https://www.community.genelec.com/forum/-/message_boards/message/961078#_19_message_961078

kamb1ng, modified 5 Years ago.

RE: GLM 3.0 AutoCal Broken

Youngling Posts: 6 Join Date: 3/24/17 Recent Posts
 
Ilkka Rissanen:

Please download and install latest GLM 3.0 Beta build 117 here.

https://www.community.genelec.com/forum/-/message_boards/message/961078#_19_message_961078

Hi Ilkka, beta 117 build has been downloaded. Unfortunately i am excperiencing the same exact issue -- nothing has changed.

Edit: I should note that i've sent support an example of my .sam file in beta 116.

jani-oksanen, modified 5 Years ago.

RE: GLM 3.0 AutoCal Broken

Jedi Master Posts: 449 Join Date: 3/30/17 Recent Posts

Hello,

I have replied to your enquiry by e-mail, and it seems the microphone is faulty. Please reply back to me by e-mail and lets have your microphone replaced.

Best Regards,
Jani Oksanen
Factory Service Team